APN

Fibre2air APN Settings – For Android, Windows, iPhone, And Blackberry

We all have been to a place when we could not use the internet even if our handset was working fine and our sim was all fine as well. In such scenarios, we all blame the network service providers but should it be the case? No. We are saying this because sometimes, everything is fine and the issue is with the APN settings. If you are in the same boat, we can help you with that as we have added Fibre2air APN Settings – For Android, Windows, iPhone, And Blackberry in this article to help you out. We have added the step-by-step guidelines to make sure that you have no issues in internet surfing. So, let’s see what we have in the house for you!

Fibre2air APN Settings For Android

In this section, we have added the guidelines to make sure that if you have the Android phone and Fibre2air sim network, your internet is working fine.

  1. In the first step, go to the settings of your mobile phone and go to “more”
  2. Then, click on the “mobile network” tab
  3. Then, go to the “access point names (APN) and click on the “+” icon
Fibre2air APN Settings For Android, iPhone, BlackBerry, And Windows
Name Fibre2air
APN connect
Proxy Not Set
Port Not Set
Username exetel
Password Not Set
Server Not Set
MMSC http://mmsc.mdata.net.au:8003
MMS Proxy 10.1.1.180
MMS Port 80
MCC 505
MNC 01
Authentication Type None
APN Type default, dun, supl, mms
APN Protocol Ipv4
APN Roaming Protocol Ipv4
Enable/Disable enabled
Bearer unspecified
MVNO Type None
MVNO Value Not Set

Fibre2air APN Settings For Windows Phone

Your phone might be very difficult to use but our step-by-step guideline will ease up everything. If you are having an internetworking problem on your Windows phone, we can help you with that!

  1. In the first step, open the settings by swiping left
  2. Now, click on the “Network & Wireless”
  3. Then, go to the SIM Settings and add the following details;
Fibre2air APN Settings For Android, iPhone, BlackBerry, And Windows
Name Fibre2air
APN connect
Proxy Not Set
Port Not Set
Username exetel
Password Not Set
Server Not Set
MMSC http://mmsc.mdata.net.au:8003
MMS Proxy 10.1.1.180
MMS Port 80
MCC 505
MNC 01
Authentication Type None
APN Type default, dun, supl, mms
APN Protocol Ipv4
APN Roaming Protocol Ipv4
Enable/Disable enabled
Bearer unspecified
MVNO Type None
MVNO Value Not Set

Once you have added all the details, save them to use the internet

Fibre2air APN Settings For iPhone

In this section, we have added the guidelines to set the APN settings if you are using the iPhone. So, have a look!

  1. In the first step, go to the settings and click on “mobile data”
  2. Then, click on the “mobile data network” and feed in the following details;
Fibre2air APN Settings For Android, iPhone, BlackBerry, And Windows
Name Fibre2air
APN connect
Proxy Not Set
Port Not Set
Username exetel
Password Not Set
Server Not Set
MMSC http://mmsc.mdata.net.au:8003
MMS Proxy 10.1.1.180
MMS Port 80
MCC 505
MNC 01
Authentication Type None
APN Type default, dun, supl, mms
APN Protocol Ipv4
APN Roaming Protocol Ipv4
Enable/Disable enabled
Bearer unspecified
MVNO Type None
MVNO Value Not Set

Now, save the details and changes!

Fibre2air APN Settings For BlackBerry

Even though there are very fewer BlackBerry users left but we know that we have a reader base that uses Blackberry. So, we have gathered up all the data required by the BlackBerry users using Fibre2air mobile network. Have a look!

  1. In the first step, go to the settings and then choose “network connections”
  2. Now, choose the “cellular and sim settings” and then, add the APN settings that we have mentioned in the table below;
Fibre2air APN Settings For Android, iPhone, BlackBerry, And Windows
Name Fibre2air
APN connect
Proxy Not Set
Port Not Set
Username exetel
Password Not Set
Server Not Set
MMSC http://mmsc.mdata.net.au:8003
MMS Proxy 10.1.1.180
MMS Port 80
MCC 505
MNC 01
Authentication Type None
APN Type default, dun, supl, mms
APN Protocol Ipv4
APN Roaming Protocol Ipv4
Enable/Disable enabled
Bearer unspecified
MVNO Type None
MVNO Value Not Set

Now, just save the settings and we are sure that you will be connected to the internet.

This was all about Fibre2air APN Settings – For Android, Windows, iPhone, And Blackberry and we hope that it helped you use the internet to the fullest. If you still have any issues, you can reach out to us through the comment section below and our team will get back to you with the help. Thank you!

Seerat Ul Qamar

I'm Seerat Ul Qamar. When I'm not eating, I'm typing away at my desk. I've got a knack for writing from others' perspectives. I can guarantee the content and information that you have been looking for!

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close