How To

How To Read A Smart Electric Meter – The Ultimate Guide

Technology is uprising and it has impacted each aspect of our lives. For instance, who would have thought about the smart meters but they are all the rage now. The smart meters are convenient for sure but they can be difficult to read. If you have difficulty reading the smart meter, we have the guideline in this article.

How To Read The Smart Electric Meter

Keypad – Single Rate

  1. Look at the keypad and press the digit 9
  2. On the display, KWH will appear
  3. Then, eight digits will show up and that’s the reading of your smart electric meter s
  4. You need to note down this reading

Keypad – E7/Two Rate

E7 smart meters can be tricky to read. They don’t show separate reading for day and night. For that, you need to take the reading at and at night, separately. To take the meter reading on E7 meter, follow the following steps;

  1. Press 6 on the meter’s keypad
  2. Keep pressing 6 until R01 shows up on the screen
  3. Then, eight digits will show up on the screen and that’s the ready
  4. Note down the reading and if you don’t, don’t worry as the cycle will keep showing multiple readings

Two Buttons

  1. Press B or Display Select and the screen will light up
  2. Keep clicking the option four times until “Total Active Import” comes on the screen
  3. You need to note down the reading including all the decimal points

Three buttons

  1. There will be three buttons on the screen
  2. You don’t need to press any button as the screen will cycle through
  3. The zeros will show up and you might need to wait for the other numbers to show up
  4. You need to note down the reading including all the zeros and decimals
  5. In case of E7 meter, you need to forward the screen until number 201 shows up

This was all about How To Read A Smart Electric Meter – The Ultimate Guide. We hope this article helped you out. If you need further assistance, we can provide all the assistance you need!

How do you read a smart electric meter?
We have added all the steps to follow to ensure you are able to get the readings on the smart meter.
How do I get a meter reading from smart meter?
1. Press 6 on the meter’s keypad 2. Keep pressing 6 until R01 shows up on the screen 3. Then, eight digits will show up on the screen and that’s the ready 4. Note down the reading and if you don’t, don’t worry as the cycle will keep showing multiple readings
What is a smart meter for electricity?
The smart meters are available for electricity as well as gas. These meters ensure that you are able to get precise readings about how much electricity you have used.
How do I turn off my smart meter?
If you need to switch off the smart meter, press the power button at the back for five seconds and it will shut off.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close